Influence of Spatial-Temporal and Environmental Factors on Larimichthys polyactis,Octopus variabilis,and Species Aggregated Set-Net CPUEs in Haizhou Bay,China     

TANG Yanli  MA Shuyang  LIU Changdong  WANG Xinmeng  CHENG Shasha 《中国海洋大学学报(英文版)》2018,(4)

Set-nets are common alongshore fishing gear used in Haizhou Bay, which rely on flow to catch fish. The catch per unit effort(CPUE) of set-net is affected by spatial-temporal and environmental factors but no research has been conducted on this subject. In this study, we used generalized additive models(GAMs) to explore the influence of spatial-temporal and environmental factors on CPUEs of species aggregated, small yellow croaker(Larimichthys polyactis), and octopus(Octopus variabilis) based on logbooks investigations conducted at 4 stations in an alongshore area of Haizhou Bay from 2011 to 2012. The results showed that all CPUEs exhibited significant spatial-temporal differences at various scales. Aggregated CPUE was high when the sea surface temperature(SST) was 15-18℃ and 20-23℃, which was mainly determined by life history traits of the octopus and small yellow croaker(optimal SSTs 14-17℃ and 19-24℃, respectively). Chlorophyll-a concentration had significant influences on the aggregated, small yellow croaker and octopus CPUEs at optimal ranges of 3.8-6.2 mg m~(-3), 4.2-4.8 mg m~(-3) and 4.5-5.5 mg m~(-3), respectively. Flow through the net had positive relationships with CPUEs. The approximate logarithmic trends in regression curves had a critical point of 2.5 Mm~3 d~(-1), which was the dividing point that differentiated whether the major factor affecting CPUEs was the flow velocity or the fishery resource. Our results from this study will help guide fishery production and improve catch rate of set-net fishing in Haizhou Bay.  相似文献   

滇西北地区近年来应力场的数值模拟研究     

武永彩  李昂  唐红涛 《大地测量与地球动力学》2018,38(12):1238-1240

建立滇西北地区三维有限元地质模型，将2009~2016年GPS速度场数据作为数值模拟的位移边界条件，模拟获取该地区的构造应力场。结果表明，在楚雄至滇西北地区整体显示张性应力区；出现由“洱源鹤庆断裂-红河断裂-程海断裂”圈起的低值张性区，区域内部张性应力明显低于外部，这种张应力低值区尤其在区域四周断裂边界处，往往是地壳断裂活动的频发区；曲江断裂北端及元谋-绿汁江断裂南端出现张性应力集中区，是今后重点关注的断裂结点。  相似文献   

五味安神颗粒干法制粒工艺优化研究          下载免费PDF全文

黄生武  汤波  朱立华 《应用海洋学学报》2018,34(9):173-175

目的：提高五味安神颗粒的产品质量，优化制备工艺。方法：通过单因素试验优化颗粒的制备工艺，以辊压制粒后的干颗粒粒径分布为考核指标，对影响干压制粒的轧辊压力、轧辊转速和物料的传送速度进行考察。结果：优化后的干法制粒工艺中间体颗粒得率达到64%，工艺参数为螺旋转速120rpm，轧辊转速26rpm，轧辊间隙0.8mm，整粒转速150rpm，工作压力120bar，整粒孔径1.5mm。结论：干法制粒工艺制备的中间体颗粒符合质量要求。  相似文献   

基于分布式控制力矩陀螺的水下航行器轨迹跟踪控制   总被引：2，自引：0，他引：2  

黄道敏  徐瑞昆  唐国元  冯雷  刘智  徐国华 《海洋工程》2018,36(6):69-76

基于控制力矩陀螺群(CMGs)的水下航行器具有低速或零速机动的能力。采用基于分布式CMGs的水下航行器方案,并研究其水平面的轨迹跟踪控制问题。通过全局微分同胚变换将非完全对称的动力学模型解耦成标准欠驱动控制模型,并根据简化的模型构建其轨迹跟踪的误差动力学模型,将轨迹跟踪控制问题转化为误差模型镇定问题。基于一种分流神经元模型和反步法设计了系统的轨迹跟踪控制律,该控制器不需要对任何虚拟控制输入进行求导计算,且能确保跟踪误差的最终一致有界性。仿真结果表明该控制器能够实现在不依赖动力学参数先验知识的情况下对光滑轨迹的有效跟踪。  相似文献   

脚靴式海上升压站灌浆连接段强度分析研究   总被引：1，自引：1，他引：0  

王永发  孙震洲  汤群益  陈杰峰 《海洋工程》2020,38(5):107-115

与国内已建成的海上升压站相比，脚靴式海上升压站导管架对桩和套筒间的灌浆连接强度要求更高，完全套用单桩风电结构的分析方法会使结构设计不准确。由于桩和套筒之间设置有剪力键，当特殊情况时还需增加灌浆连接增强钢筋，在地震及撞船作用下容易导致灌浆接触界面分离等破坏，当前尚未有针对此类情况系统的灌浆连接强度校核方法。以某脚靴式海上升压站为例，分析其在在位、撞船、地震、疲劳等多个主控工况下灌浆连接、剪力键及增强钢筋的强度及稳定性，结果表明该海上升压站灌浆连接段满足设计要求，并研究了各参数对灌浆连接段强度的敏感程度，为今后脚靴式海上升压站各主控工况下的灌浆连接段强度分析、优化设计提供参考与借鉴。  相似文献   

北部湾地区海砂填料的动力特性分析     

王家全  陈胜前  唐毅  黄世斌  黄钦政 《海洋工程》2020,38(5):149-155

为研究北部湾地区海砂填料的动力特性，采用高级动态三轴测试系统开展循环荷载下的动三轴试验，研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小，围压150 kPa时振次10 000后应变仅为3%；随着动应力幅值的增大轴向累积应变随之增大，且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大，不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势，ε_d>0.3%后开始趋于稳定；不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势，其中动应力幅值对动弹性模量有明显的影响，围压影响相对较小。孔压比随动应力幅值增加而减小，随围压增加而增加。  相似文献   

Spatial Characteristics and Controlling Factors of the Strikeslip Fault Zones in the Northern Slope of Tazhong Uplift,Tarim Basin: Insight from 3D Seismic Data     

HAN Xiaoying  TANG Liangjie  DENG Shang  CAO Zicheng 《《地质学报》英文版》2020,94(2):516-529

The detailed characteristics of the Paleozoic strike-slip fault zones developed in the northern slope of Tazhong uplift are closely related to hydrocarbon explorations. In this study, five major strike-slip fault zones that cut through the Cambrian-Middle Devonian units are identified, by using 3D seismic data. Each of the strike-slip fault zones is characterized by two styles of deformation, namely deeper strike-slip faults and shallower en-echelon faults. By counting the reverse separation of the horizon along the deeper faults, activity intensity on the deeper strike-slip faults in the south is stronger than that on the northern ones. The angle between the strike of the shallower en-echelon normal faults and the principal displacement zone(PDZ) below them is likely to have a tendency to decrease slightly from the south to the north, which may indicate that activity intensity on the shallower southern en-echelon faults is stronger than that on the northern ones. Comparing the reverse separation along the deeper faults and the fault throw of the shallower faults, activity intensity of the Fault zone S1 is similar across different layers, while the activity intensity of the southern faults is larger than that of the northern ones. It is obvious that both the activity intensity of the same layer in different fault zones and different layers in the same fault zone have a macro characteristic in that the southern faults show stronger activity intensity than the northern ones. The Late Ordovician décollement layer developed in the Tazhong area and the peripheral tectonic events of the Tarim Basin have been considered two main factors in the differential deformation characteristics of the strike-slip fault zones in the northern slope of Tazhong uplift. They controlled the differences in the multi-level and multi-stage deformations of the strike-slip faults, respectively. In particular, peripheral tectonic events of the Tarim Basin were the dynamic source of the formatting and evolution of the strike-slip fault zones, and good candidates to accommodate the differential activity intensity of these faults.  相似文献   

冀中坳陷中部现今热岩石圈厚度及地热学意义探讨     

崔悦  朱传庆  邱楠生  唐博宁  郭飒飒 《地质学报》2020,94(7):1960-1969

热岩石圈厚度是研究盆地的构造演化和板块动力学的重要参数,本文通过实测数据构建地壳分层模型,根据热传导的基本原理,计算了冀中坳陷中部的Moho面温度以及热岩石圈厚度,并探讨其地热学意义。结果表明:冀中坳陷中部的Moho面温度分布在500～600℃,西南侧整体温度较东北部高,热岩石圈厚度介于102～122km,其平面展布特征与华北克拉通热岩石圈厚度西厚东薄的特征相吻合,为华北克拉通受太平洋板块西向俯冲导致东部遭受破坏提供了依据,并且较薄的岩石圈使热流更易传导到地壳浅部,成为了该地区热异常的成因背景。  相似文献   

钻探参数实时采集系统研制与应用          下载免费PDF全文

汤小仁  孟义泉  訾兵  梁日旺 《探矿工程》2020,47(6):46-53

钻探参数实时采集系统研制的目的是向钻探技术及管理人员提供直观的钻探实时参数，通过该系统可全天候的掌握钻探工况。钻探参数采集的方法是通过传感器采集压力、转速、位移、流量、液位等物理参数，使用配套的软硬件设备进行数据转换和处理，在人机交互界面显示直观的工程参数。该系统根据野外现场不同工作环境可以使用互联网、GPRS终端或者北斗卫星终端把现场实时工程数据无线传输至远程服务器上，用户通过手机或电脑即可查看到现场的实时或历史工程数据。采用本系统可以预防和减少钻探事故，为事故处理提供数据支撑，为实现钻探自动化、智能化提供基础数据。  相似文献   

基于简化力学模型的隧道锚极限承载力估值公式     

王东英  汤华  尹小涛  杨光华  姜燕 《岩土力学》2020,41(10):3405-3414

悬索桥隧道式锚碇的设计理念为锚碇夹持岩体协同承载，因而承载能力远超同体积的重力式锚碇。但因目前对围岩协同作用认识尚不充分，在当前隧道式锚碇设计中仍保守地忽略锚碇和岩体间的挤压效应。为弄清锚碇?岩体协同承载的机制，揭示隧道锚承载能力提高的本质，通过分析隧道式锚碇建设至成桥全过程受力，建立隧道锚的简化力学模型，并引用Mindlin应力解分析了荷载沿锚碇轴向的传递规律以及荷载产生的作用于锚碇?岩体间的挤压应力分布，最终给出了隧道式锚碇极限承载力的简化估算方法，并通过伍家岗大桥隧道锚工程实例分析了结果的合理性。所得结论主要有：锚碇?岩体界面力主要由锚碇自重和锚碇?岩体相互挤压产生；锚碇?岩体界面附加应力自后锚面向前锚面呈先增后减的变化趋势，在距后锚面约1/3L处达到应力峰值；以容许抗剪强度为破坏判据解得的伍家岗长江大桥隧道式锚碇的极限承载力为3 504 MN，约为16倍的设计荷载，与室内试验值基本吻合。  相似文献